Fife纠偏-检验,MAGPOWR张力-控制,Tidland分切-卷取,MAXCESS国际集团,美塞斯产品,美塞斯中国,授权代理商厦门飞美泰贸易有限公司 Fife纠偏-检验,MAGPOWR张力-控制,Tidland分切-卷取,MAXCESS国际集团,美塞斯产品,美塞斯中国
首 页 公司介绍 行业方案 产品信息 服务和支持 热点新闻 招聘信息 留言板 联系我们
 

纠偏-检验



张力-控制



分切-卷取
美塞斯产品家族 当前位置:首页 >> MAGPOWR产品首页 >> PA-90 & PA-2 

PA-90 & PA-2 Power Amplifiers, 24 and 90 vdc
 
PA-90 & PA-2 Power Amplifiers, 29 and 24 vdc The PA-90 and PA-2 Power Amplifiers are designed to provide the extra current required for controlling magnetic particle brakes and clutches in any tension control application. For use with DIGITRAC II , EZ-Trac, or VERSATEC, the PA-90 and PA-2 can be mounted inside the control's enclosure, and receives its control signals directly from the tension control.  This unit also includes reverse current circuitry as a standard feature, thus allowing greater controllability in the lowest torque range of the clutch or brake being operated.

The PA-90 is used to control 90 VDC brakes and clutches only, while the PA-2 can be used to control either 24 or 90 VDC units. With 115 VAC input, either power amplifier will provide a 3.6 to 90 VDC, current regulated output to accurately control a 90 VDC brake or clutch. With a 24 VDC input, the PA-2 can also provide a 1.2 to 24 VDC, current regulated output to accurately control a 24 VDC unit.

The PA-90 and PA-2 Power Amplifiers are designed to provide the extra current required for controlling magnetic particle brakes and clutches in any tension control application. For use with DIGITRAC II , EZ-Trac, or VERSATEC, the PA-90 and PA-2 can be mounted inside the control's enclosure, and receives its control signals directly from the tension control.  This unit also includes reverse current circuitry as a standard feature, thus allowing greater controllability in the lowest torque range of the clutch or brake being operated.
The PA-90 is used to control 90 VDC brakes and clutches only, while the PA-2 can be used to control either 24 or 90 VDC units. With 115 VAC input, either power amplifier will provide a 3.6 to 90 VDC, current regulated output to accurately control a 90 VDC brake or clutch. With a 24 VDC input, the PA-2 can also provide a 1.2 to 24 VDC, current regulated output to accurately control a 24 VDC unit.

Specifications:
PA-2: With 115 VAC input: -3.6 to 90 VDC, with selectable current ranges 1/8, 1/4, 1/2 amp maximum 
With 24 VDC input: -1.2 to 24 VDC, with selectable current ranges 1/8, 1/4, 1/2, 1, 2 amp maximum
General Specifications:
Input:
PA-90: 115 VAC ±10%, 50/60 Hz 
PA-2: 115 vac+-10%, 50/60 Hz 24 vdc +-10%
Output:
PA-90 -3.6 to 90 VDC, with selectable current range 1/8, 1/4, 1/2 amp maximum

 


[返回上一页]  [返回MAGPOWR产品主页]
版权所有© 2006-2013 厦门飞美泰自动化科技有限公司 地址:厦门市厦门火炬高新区火炬东路11号创业大厦711单元 邮编:361009
电话: (86)592-2107107 2051408 传真: (86)592-2107108 Email: feimeitai@163.com 网址:http://www.phmattel.comhttp://www.feimeitai.com
建议分辨率1024X768,IE6.0以上浏览器,以获得最佳效果。闽ICP备09031839号 技术支持:泽迅网络